Quick Answer
Brow lamination at home uses three steps: a cream that softens the structure of each hair so it can be reshaped, a second cream that sets it in its new position, and a conditioning finish. Patch test 48 hours before, follow the timings in your kit's leaflet exactly, keep your brows dry for 24 hours afterwards, and don't repeat it more often than every six to eight weeks. Done well, results last around six to eight weeks.
What Brow Lamination Actually Does
Think of it as a perm for your brows, except instead of adding curl it straightens and lifts. The first step loosens some of the bonds that hold each hair in its natural shape. You brush the hairs into a new direction — usually up and out — and the second step rebuilds those bonds so the hairs stay there.
The result is brushed-up, fuller-looking brows made entirely from your own hair. Hairs that grew flat or downwards fan out and can cover small gaps. What lamination can't do is add hair or colour: if an area has no hair at all, there's nothing to redirect.
Is Lamination Right for Your Brows?
A good fit if
- Your brows are unruly, flat or grow downwards
- You have small gaps that hair can be brushed across
- You want a lifted, groomed look every day
- You're tired of setting your brows with gel
Not right now if
- Areas of your brow have little or no hair
- The skin around your brows is irritated, broken or sunburnt
- You've laminated in the last six weeks
- You're pregnant or breastfeeding and haven't checked with your doctor
If sparse or missing areas are the real issue, lamination won't fix them — brow tattoo stickers are the better tool. See needle-free alternatives to microblading for how the options compare.
Before You Start
Patch test — 48 hours ahead
This is the step most guides skip and the one that matters most. Apply a small amount of each step to the inside of your elbow or behind your ear, following the kit's timings, then wait 48 hours. Redness, itching, burning or swelling means don't go ahead.
Pause active skincare
Retinoids and exfoliating acids make skin more reactive. Stop using them around the brows for several days beforehand — your kit leaflet will give the exact window.
What you'll need
- Your lamination kit — the REBROWED kit includes Sculpt Cream, Seal Cream, Brow Keratin, two brow wands and applicator cards
- Cling film, cut into two strips
- Cotton pads and an oil-free cleanser
- A timer, a mirror and good daylight
DIY Brow Lamination Kit
Three steps — Sculpt, Seal, Keratin — with wands and applicator cards included.
Shop
How to Laminate Your Brows at Home, Step by Step
- CleanseRemove all makeup and oil with an oil-free cleanser, then let the brows dry completely. Any oil left on the hair stops the formula working evenly.
- Map your shapeBrush the hairs up and slightly outwards into the shape you want. Take your time — this is the shape you'll wear for the next six to eight weeks.
- Apply Step 1 — Sculpt CreamSpread a thin, even layer along the hairs with an applicator card, keeping it on the brow rather than the surrounding skin. Brush into shape, cover with cling film and start your timer. Keep the cream on the brow hairs only and well away from your eyes.
- Remove completelyWipe the cream away with a dry cotton pad, moving in the direction of your new shape. Make sure none is left on hair or skin.
- Apply Step 2 — Seal CreamSame method: thin layer, brush into shape, cling film, timer. This is the step that locks the new direction in.
- Remove completelyWipe away fully, again in the direction of the shape.
- Apply Step 3 — Brow KeratinA small amount brushed through the hairs to condition them after processing. Leave it in and brush the brows into place.
- Tidy lastOnly now trim any long hairs or remove strays well outside the shape. Doing it before processing makes it hard to see the final line.
Getting the Timing Right
Every lamination formula has its own processing times, and they're printed in your kit's leaflet for a reason. Follow them exactly.
The most common mistake
Leaving a step on longer doesn't give a stronger lift — it over-processes the hair, which can leave brows frizzy, brittle or pointing in odd directions. Fine, light or previously processed hair usually needs the shorter end of the range. If in doubt, go shorter: you can always repeat in six to eight weeks, but you can't undo over-processing.
Mistakes to Avoid
Do
- Patch test 48 hours before every first use
- Keep creams on the hair, off the skin
- Keep all three creams away from your eyes and lashes; if any product gets into your eye, rinse straight away with plenty of lukewarm water and seek medical advice if irritation continues.
- Remove each step fully before the next
- Set a timer rather than guessing
Don't
- Leave a step on longer for a stronger result
- Laminate again within six to eight weeks
- Combine with tinting unless your kit says it's compatible
- Laminate over irritated or broken skin
Aftercare
First 24 hours
Keep brows dry — no water, steam, sauna or heavy exercise. Skip makeup on the brows and avoid rubbing them. Sleeping on your back helps.
Every morning
Brush your brows into shape with a clean spoolie. The lift stays, but a quick brush keeps it looking deliberate.
Every evening
Condition. Lamination is a chemical process, and a nightly conditioning step keeps hairs soft and flexible between treatments.
Lash & Brow Growth Serum
A nightly conditioning step for lashes and brows between treatments.
Shop
How Long Does Brow Lamination Last?
Usually six to eight weeks. The hairs themselves stay laminated — what changes is that they shed naturally and new, unprocessed hairs grow in their place, so the effect softens gradually rather than dropping off.
Wait at least six to eight weeks before laminating again. Repeating too soon processes the same hairs twice, which is where most at-home damage comes from.
At Home or in a Salon?
A salon technician adjusts timings to your hair in real time, maps your shape by eye and can add a tint in the same appointment. That skill is what you're paying for.
At home, you trade that for cost, convenience and control over your own shape. The leaflet becomes your technician — which is why reading it twice before you start matters more than anything in this guide.
Shop This Guide
Everything mentioned above, in one place.
DIY Brow Lamination Kit
The three-step kit used in this guide.
Shop
Lash & Brow Growth Serum
Nightly conditioning between treatments.
Shop
Brow Tattoo Stickers
For gaps lamination can't cover.
Shop
Nano Brow Pen
Hair strokes to fill sparse areas.
Shop
Frequently Asked Questions
How long does at-home brow lamination last?
Around six to eight weeks. The effect fades gradually as laminated hairs shed and new hairs grow in.
Is brow lamination bad for your eyebrows?
Done correctly and not too often, it's a gentle treatment. Damage usually comes from leaving a step on too long or repeating it before six to eight weeks have passed. Conditioning between treatments helps keep hairs healthy.
Can you laminate thin or sparse eyebrows?
Lamination can make thin brows look fuller by redirecting hairs across small gaps. It can't add hair, so areas with little or no hair are better filled with a brow pen or temporary brow tattoo stickers.
How often can I laminate my brows?
No more than every six to eight weeks. That gives time for processed hairs to shed and new ones to grow in.
Can I get my brows wet after lamination?
Keep them dry for the first 24 hours — no water, steam, sauna or heavy sweating. After that, normal washing is fine.
Do I need a patch test for brow lamination?
Yes. Apply a small amount of each step to the inside of your elbow or behind your ear 48 hours before, and don't go ahead if you notice redness, itching, burning or swelling.
Brow guides, straight to your inbox.
Honest guides on brow recovery, shaping and care — plus first word on new REBROWED launches. No noise.
Read next
Alternatives to Microblading: 5 Needle-Free Ways to Fuller Brows